TTCRD DT – 09/06/2020

TTCRD DT – 09/06/2020

SPONSOR THIS WEEK:

DRS Designs

 

 

This weeks prize is a $20 voucher for the online store.

This week’s card is made with Brick Wall from DRS Designs.

A brick wall is a fabulous blank canvas for almost any theme which is why I opted for the Brick Wall. I could have gone all pinks and floral on a nice grey background with lots of green. But I didn’t! Instead I decided to go with a cool boys cards.

I started by copying and pasting the Brick Wall image several times in a Word Document until I had an A4 page full of bricks. I then proceeded to cut out a piece of wall to fit my 6 x 6 card. I coloured the wall using Jim Holtz Distress Ink – Pumice Stone making sure I did it rough and uneven and leaving a few places almost white. I also cut out a few individual bricks and coloured these in Gathered Twigs Distress Ink.

The boy image and sentiments are from Polkadoodles. They were coloured using ZIG real brush pens.

I chose a white 6 x 6 inch card which got a black mat which I stuck my Brick Wall to. I added the boy charactar and the sentiments before placing the small individual tiles around the card mounted on foam pads to add dimension. Fairly quick card with enough grunge to keep any young boy happy!

RECIPE:

  • Digi Image from DRS DesignsBrick Wall.
  • Tim Holtz Distress Inks – Pumice Stone and Gathered Twigs
  • Digi boy image and sentiments from Polkadoodles – Cool Dude.
  • Zig real brush pens
  • Digi stamps printed onto 160 gms white card, cut out and coloured.
  • Black card for layering.
  • all mounted on top of a 6 x 6 square white card.

Are you joining us for this challenge? As usual the theme is “Anything Goes”.

I am entering this card into the following challenges:

 

 

 

TTCRD DT – 26/05/2020

TTCRD DT – 26/05/2020

SPONSOR THIS WEEK:

Wink Wink Ink

 

 

TBA

This week’s card is made with Narwhal from Wink Wink Ink.

This is an unusual image for me, so I thad to think for a little while. It had to be something with the ocean – and there had to be some sort of fluidity or movement.

Recently I bought a set of Tattered Lace dies which continued some images from fishing and the sea, so they were screaming out to be incorporated.

The image came plain and coloured – and I choose the easy option of using the coloured version. So I printed and cut out a couple of whales. I die cut some of the Tattered Lace images too. Then I took a 6 x 6 white card and cut out a strip of card along the middle of the card and replace with acetate.  I started playing around with all my cut-outs until I had a good layout. Then I printed an ocean image and used as and insert in the cards, so it showed through the acetate. 

RECIPE:

  • Digi Image from Wink Wink InkNarwhal
  • Tattered Lace die cuts
  • Digi image printed onto 160 gms white card.
  • 6 x 6 square white card

Are you joining us for this challenge? As usual the theme is “Anything Goes”.

I am entering this card into the following challenges:

 

 

 

TTCRD DT – 12/05/2020

TTCRD DT – 12/05/2020

SPONSOR THIS WEEK:

The Cutting Cafe

 

 

The prize is 3 sets from the online store.

This week’s card is made with 3D Shadow Card from The Cutting Cafe. This cutting file have multiple files in one set – three different 3D shadow cards – with a circle, heart or square aparture. Multiple additional decorative and sentiment files too. I cut my files using my Scan N Cut, but files were available as PDF or other formats too. For this file there is an excellent video tutorial showing excactly what files to print and how to piece them together to finish the card. The video is very easy to follow and the end result is a stunning background for any type of decoration.

RECIPE:

  • SVG file from The Cutting Cafe –3D Shadow Card.
  • Die Cuts from Carnation Crafts – Woodland Corners
  • Cream and lilac 12 x 12, 216 gsm,  First Edition Card stock.

Are you joining us for this challenge? As usual the theme is “Anything Goes”.

I am entering this card into the following challenges:

     
TTCRD DT – 28/04/2020

TTCRD DT – 28/04/2020

SPONSOR THIS WEEK:

Sheepski Designs

 

 

The prize is 3 Digital Images from online store..

This week’s card is made with Sunflowers from SheepSki Designs.

For this image I was a bit torn about what to do, I printed out small and big images and also made a background of the stamp. In the end I decided it was such a beautiful image on it’s own in it’s simplicity that it didn’t need a fanfare around it.

So with that in mind I printed the image – BIG – and coloured it with my Zig watercolour pens. I used a bit of brown card for some matting and finished up adding a simple Happy Birthday sentiment cut in brown with a yellow shadow. Everything was added to a big 8 x 8 inch white card – voila!

RECIPE:

  • Digi Image from SheepSki DesignsSunflowers.
  • Zig real brush pens
  • Digi stamp printed onto 160 gms white card, cut out and coloured.
  • Brown card for layering and sentiment, a bit of yellow card for sentiment.
  • all mounted on top of a 8 x 8 square white card.

Are you joining us for this challenge? As usual the theme is “Anything Goes”.

I am entering this card into the following challenges:

 

 

 

TTCRD DT – 14/04/2020 (2)

TTCRD DT – 14/04/2020 (2)

SPONSOR THIS WEEK:

QKR Stampede

 

 

The prize is 2 images from their store.

This week’s card is made with Art Palette from QKR Stampede.

When you are a crafter – I think we are all drawn to a pain palette. Part of me wanted to go with a tone on tone colour scheme for the palette, but in the end I decided to go all out and add lots of colour – just as you often see the palette. It is such a great and versatile design – and can be used for any occasion. It works great as a background to another image – or indeed as the main design with a burst of colour behind it. I may add some other images to this page later…..

 

RECIPE:

  • Digi Image from QKR Stampede –Art Palette.
  • Zig real brush pens
  • Digi stamp printed onto 160 gms white card, cut out and coloured. 
  • Background and image of girl painting comes from The Paper Shelter and image is called Seeking Inspiration.
  • all mounted on top of a 6 x 6 square white card adding a stamped sentiment to finish the card.

Are you joining us for this challenge? As usual the theme is “Anything Goes”.

I am entering this card into the following challenges:

 

 

 

TTCRD DT – 14/04/2020 (1)

TTCRD DT – 14/04/2020 (1)

SPONSOR THIS WEEK:

DRS Designs

 

 

Prize is $20 voucher for the store.

This week’s card is made with Shamrock Circle from DRS Designs.

I am absolutely obsessed with wreaths at the moment – well it’s been a while – just love what you can do with them. So when choosing an image for this weeks card it had to be the Shamrock Circle. It is such a beautiful and versatile wreath/circle and you can add anything at all to it.

 

RECIPE:

  • Digi Image from DRS Designs –Shamrock Circle.
  • Zig real brush pens
  • Digi stamp printed onto 160 gms white card twice. Cut one out around edge of image (leaving middle in) and the other cut out all around image and decoupaged one of top of the other.
  • Phantasia Design (Spring Rabbit) images used for background and the parcel is also their design.
  • all mounted on top of a 6 x 6 square white card and a peel-off sentiment added.

Are you joining us for this challenge? As usual the theme is “Anything Goes”.

I am entering this card into the following challenges: